CS2 eDPI calculator

Updated

Enter your mouse DPI and your CS2 sensitivity. You get your eDPI, the mouse distance for a full 360° turn, and the sensitivity that keeps the same feel if you change DPI. The numbers you type stay in your browser.

eDPI
1000
cm per 360°
41.56
inches per 360°
16.36

Switching DPI? Keep the same feel

New CS2 sensitivity
0.625

How it is worked out

eDPI = DPI × sensitivity

cm/360 = 2.54 × 360 ÷ (DPI × sensitivity × 0.022)

new sensitivity = old DPI × old sensitivity ÷ new DPI

cm/360 uses CS2’s default m_yaw of 0.022. If you changed m_yaw, these distances do not apply.

What eDPI means

eDPI is your mouse DPI multiplied by your in-game sensitivity. It turns any mix of DPI and sensitivity into one number for how fast your crosshair moves:

DPISensitivityeDPI
4002.51000
8001.251000
16000.6251000

All three rows turn the camera exactly the same distance for the same hand movement.

eDPI only compares like with like inside one game. Valorant multiplies sensitivity by a different factor than CS2, so a Valorant eDPI and a CS2 eDPI are not the same speed. Our Valorant to CS2 sensitivity converter handles that.

cm/360: the distance for a full turn

cm/360 is how far you move the mouse to spin round once. It is the number worth writing down, because it does not depend on DPI. CS2 turns the camera by m_yaw degrees for each mouse count at sensitivity 1, and m_yaw defaults to 0.022 (CS2 convar dump; Valve Developer Community cvar list). So:

cm/360 = 2.54 × 360 ÷ (DPI × sensitivity × 0.022)

Worked example at 800 DPI and sensitivity 1.25: 800 × 1.25 × 0.022 = 22 degrees per inch of mouse movement. 360 ÷ 22 = 16.36 inches, and 16.36 × 2.54 = 41.56 cm for a full turn.

Changing DPI without changing the feel

New mouse, or a different DPI step on the old one? Keep the eDPI the same and nothing changes in the game:

new sensitivity = old DPI × old sensitivity ÷ new DPI

Going from 800 DPI at 1.25 to 1600 DPI gives 800 × 1.25 ÷ 1600 = 0.625.

CS2's sensitivity cvar accepts values from 0.0001 to 8 (convar dump), so a very low DPI combined with a fast eDPI can run into the cap of 8. Your DPI itself is set in your mouse's own software.

Frequently asked questions

What is a good eDPI for CS2?

There is no single right number, and we do not publish a pro eDPI table we cannot source. Find a speed that lets you turn 180° in one movement and still hold small corrections steady, then write down its cm/360 so you can get back to it on any mouse.

Does m_yaw change my eDPI?

No. eDPI is just DPI × sensitivity. m_yaw changes how far the camera turns per count, so it changes your cm/360. The calculator assumes the default of 0.022.

Is eDPI the same in CS2 and Valorant?

The formula is, the speed is not. CS2 turns 0.022° per count at sensitivity 1 and Valorant about 0.07°, so the same eDPI is roughly three times faster in Valorant. The sensitivity converter does the conversion.

Does zoom sensitivity change these numbers?

No, they are hipfire numbers. CS2 scales sensitivity while zoomed with a separate cvar, zoom_sensitivity_ratio (default 1).

Why can I not set my CS2 sensitivity above 8?

That is the range of the sensitivity cvar: 0.0001 to 8. If you need a faster setting, raise your DPI.

Sources

Checked 2026-11-02.

CS2 tools

CS2 guides