Valorant to CS2 sensitivity converter

Updated

Convert your Valorant sensitivity to CS2, or CS2 to Valorant, so a full turn takes the same mouse distance in both games. Keep your DPI; only the in-game number changes.

ValorantCS2
CS2 sensitivity
1.273
cm per 360° (both games)
40.8

The sum behind it

CS2 sens = Valorant sens × 0.07 ÷ 0.022

0.4 × 0.07 ÷ 0.022 = 1.273

Hipfire only. CS2 scales zoomed sensitivity with its own cvar, zoom_sensitivity_ratio, and this converter leaves scoped settings alone in both games.

How the conversion works

CS2 and Valorant both turn the camera by a fixed angle for each count your mouse reports, multiplied by your sensitivity. That angle is the game's yaw. CS2's is 0.022 degrees (m_yaw), Valorant's is 0.07. Match the angle per count and the cm/360 matches too:

CS2 sens = Valorant sens × 0.07 ÷ 0.022 = Valorant sens × 3.1818

Valorant sens = CS2 sens × 0.022 ÷ 0.07 = CS2 sens × 0.3143

Worked example, Valorant 0.4 at 800 DPI: 0.4 × 3.1818 = 1.273 in CS2. Check it with cm/360. In Valorant, 800 × 0.4 × 0.07 = 22.4 degrees per inch, so a full turn is 360 ÷ 22.4 × 2.54 = 40.8 cm. In CS2, 800 × 1.273 × 0.022 = 22.4 degrees per inch: the same 40.8 cm.

Where the two numbers come from

CS2: 0.022. m_yaw is a console variable with a default of 0.022, described as the "mouse yaw factor" in CS2's own convar list (convar dump, build 2000938; Valve Developer Community cvar list). Type m_yaw into the console and the game prints the value it is using.

Valorant: 0.07. Riot does not publish a yaw figure. Two independent converter sites, csdb.gg and metabot.gg, both use 0.07 (checked 2026-11-02), and it is the figure behind the 3.1818 multiplier both of them quote. Because it is not an official number, the next section shows how to check it.

Check it yourself: the 360° test

  1. Set the same DPI for both games and type the converted sensitivity into CS2.
  2. In CS2, load an offline map and line your crosshair up with a vertical edge, such as a door frame.
  3. Mark the mouse's left edge on your mousepad, then move the mouse slowly to the right until the view has turned once and the crosshair is back on the same edge.
  4. Measure the distance, then do the same in Valorant's Range.

If the two distances match, give or take a few millimetres of hand error, the conversion holds, and both should match the cm/360 the converter shows.

What the converter leaves alone

It matches hipfire only. CS2 scales your sensitivity while zoomed with zoom_sensitivity_ratio (default 1), so set scoped sensitivity separately in each game. It does not touch DPI either: change DPI in your mouse software and the multiplier stays the same, as long as both games use the new value.

Frequently asked questions

What is the Valorant to CS2 sensitivity multiplier?

3.1818. Multiply your Valorant sensitivity by 3.1818 at the same DPI. It is 0.07 ÷ 0.022, the ratio of the two games' yaw values.

How do I convert CS2 sensitivity to Valorant?

Multiply your CS2 sensitivity by 0.3143 (0.022 ÷ 0.07) and keep your DPI. CS2 1.25 becomes 0.393 in Valorant.

Should I change my DPI when I switch games?

No. The conversion assumes the same DPI in both games. If you want a new DPI, change it first and then convert, or use our eDPI calculator to keep your current feel.

Can I convert my eDPI instead of my sensitivity?

Yes, the same multiplier applies. A Valorant eDPI of 320 (800 × 0.4) is a CS2 eDPI of about 1018.

Sources

Checked 2026-11-02.

CS2 tools

CS2 guides